데이터 시트

Lightning Eco™ Gen. II SAS SSDs

Maximize bandwidth with low latency read speeds for the highest, most cost-effective performance.

Features

  • Full data path protection, End-to-end T10-DIF support
  • Temperature-based performance control
  • MTBF - 2.5 Million Hours3
  • 5 Year Warranty4

Benefits

  • High, Predictable Performance
  • Industry-leading Reliability
  • Highest Cost-to-performance value
  • Low latency data access for high quality of service (QoS)
  • Maximum bandwidth for high speed data transfer rates

Read-Intensive Application Workloads

  • Data Warehousing
  • Web Servers
  • Media Streaming
  • Virtual Tape Libraries (VTL)
  • Video on Demand (VOD)
  • Web-Based Applications
  • File Servers

The Lightning Eco™ Gen. II 12Gb/s SAS SSD from SanDisk® doubles interface speed, providing the highest performance for mission-critical hyperscale, cloud and virtualized data center application workloads. This next generation Lightning® SSD offers a featurerich robust design, combined with SanDisk’s custom controller and innovative parallel processing architecture to deliver full data path protection (T10-DIF support), temperature based power control, SED instant secure erase, an MTBF of 2.5 million hours, and power fail protection. This SSD is backward-compatible with 6Gb/s SAS and offers a single firmware binary platform for seamless integration and reduced qualification times.

Lightning Eco™ Gen. II SAS SSDs offer solid I/O cost to performance benefits with low latency data access for high quality of service (QoS). Available in 19nm eMLC capacities from 800GB - 1.6TB2 and with random read/write performance of up to 195K/80K IOPS* and sequential read/write speed of up to 980/600 MB/s1/*. These SSDs are designed for read-intensive applications such as Data Warehousing, Media Streaming, Video on Demand (VOD), Web-based Applications, Virtual Tape Libraries (VTL) and File Servers, with a heavy read workload comprised of a 90/10 read/write mix. This SSD offers 3 full drive writes per day (DWPD) with a limited 5 year warranty.4

Lightning Eco Gen. II SAS SSDs are a product of SanDisk’s vertical integration - spanning from the fabrication of the NAND technology and wafer to the manufacturing of the finished SSD. This vertical integration, results in a customized solution that takes full advantage of each component to deliver maximum performance and quality assurance. Lightning Eco Gen. II SSDs provide high, predictable performance, industry-leading reliability and maximum value.

  800GB - 1.6TB
Performance/IOPS
Data Throughput (Sequential Read/Write)1/* Up to 980/600 MB/s
Total IOPS* (Random Read) 4KB – (single port) Up to 195,000 IOPS
Total IOPS* (Random Write) 4KB – (single port) Up to 80,000 IOPS
Interface, Capacity, and Memory Technology
Host Interface 12Gb/s SAS
Interface Ports Dual full-duplex
Form Factor 2.5 inch
19nm eMLC User Capacities2 800GB, 1.6TB
Sector Sizes Supported 512, 520, 4K bytes/sector T10-DIF 1, DIF 2 Support
Reliability
MLC Page Pairing Protection No risk of data loss
Unrecovered Bit Error Rate (UBER) <1 sector in 1017 bits read
End-to-End Data Protection No performance impact
Patrol Read (automatic) No performance impact
Power-on Hours 8760 hours per year
MTBF3 2.5 million hours
Warranty4 Lesser of 5 years or maximum endurance used
Endurance
DWPD (Random Read)3 3 DWPD
Physical Dimensions
Height (max) 15.0 mm
Width (max) 70.1 mm
Length (max) 100.45 mm
Weight 0.238 Kg
Power Consumption
Idle 3.9 watts
Typical 5.9 watts
Environment
Operating Temperature (ambient) 0 to 60° C
Non-operating Temperature -40 to 85° C
Start-up Time (Power-on to Ready) <15 seconds

Disclosures

* Performance may vary by capacity.

1. Based on direct attached SAS performance testing, performance may be lower depending upon host device, OS and application.

2. 1 gigabyte (GB) = 1 billion bytes. Some capacity not available for data storage.

3. MTBF – Mean Time Between Failures based on parts stress analysis.

4. The earlier of (I) five (5) years or (II) the time at which such Product unit’s total cumulative data recorded on such unit at its S.M.A.R.T. attribute (log page 2Fh, parameter 25) or log page 11h, parameter 1 (Percentage Used Endurance Indicator) reaches 100% of the Product unit’s endurance value. For more warranty information, please visit kb.sandisk.com.

Specifications subject to change without notice. All specifications are based on an 11W performance level.

앞으로 플래시를 사용할 준비가 되셨습니까?

포츈지 500대 대기업이든 5명이서 출발하는 신생 기업이든 관계없이, SanDisk는 인프라 활용도를 극대화하는 데 도움이 되는 솔루션을 보유하고 있습니다.

VIA
이메일

질문을 하시면 저희가 답변을 드리겠습니다.

대화해 봅시다
800.578.6007

망설이지 말고, 잠시 얘기를 나누면서 완벽한 플래시 솔루션 구축을 시작하십시오.

판매 문의

몇 가지 간단한 질문을 하려는 경우든, 조직의 요구에 맞게 설정된 SanDisk 솔루션에 대해 논의할 준비가 되어 있든 관계없이, SanDisk 영업 팀이 항상 도움을 드리기 위해 대기하고 있습니다.

아래 양식을 작성해 주시면 질문에 기꺼이 답변해 드릴 것입니다. 영업 팀에 바로 연락해야 한다면 다음 전화 번호를 이용하십시오: 800.578.6007

필드를 비워둘 수 없습니다.
필드를 비워둘 수 없습니다.
올바른 이메일 주소를 입력하십시오.
필드에는 숫자만 사용할 수 있습니다.
필드를 비워둘 수 없습니다.
필드를 비워둘 수 없습니다.
필드를 비워둘 수 없습니다.
필드를 비워둘 수 없습니다.

관심 분야에 표시하십시오:

질문 또는 의견:

옵션을 선택해야 합니다.

감사합니다. 요청을 접수했습니다.